| Home I Speakers I Speakercraft In-wall Speakers |
 |
|
Speakercraft Aim In-wall LCR Three series
The AIM LCR series is a range of twin bass/mid in-wall speakers designed for use as front left, right and centre channels of a surround system. The pivoting front baffle allows the user to point the speakers to the listening position, improving sonic performance. Each model is constructed of higher specification materials as the range progresses. |
|
|
|
|
Speakercraft Aim LCR3 One £125
2 x 3” Graphite bass drivers. 1” silk tweeter. 60watts
H254 mm x W146 mm x D76 mm. Cut out 227mm x 120mm |
|
|
|
|
|
|
Speakercraft Aim LCR3 Three £150
2 x 3” Aluminium drivers. 1” Alu tweeter. 60watts
H254 mm x W146 mm x D76 mm. Cut out 227mm x 120mm |
|
|
|
|
|
Speakercraft Aim LCR3 Five £200
2 x 3” Kevlar drivers. 1” Mag tweeter. 60watts
H254 mm x W146 mm x D76 mm. Cut out 227mm x 120mm |
|
|
|
|
|
|
|
|
|
Speakercraft Aim In-wall LCR One series
The AIM LCR series is a range of twin bass/mid in-wall speakers designed for use as front left, right and centre channels of a surround system. The pivoting front baffle allows the user to point the speakers to the listening position, improving sonic performance. Each model is constructed of higher specification materials as the range progresses. |
|
|
|
|
Speakercraft Aim LCR One £250
2 x 5 ¼” Graphite bass drivers. 1” silk tweeter. 80watts
H443 mm x W235 mm x D102 mm. Cut out 362mm x 190mm |
|
|
|
|
|
|
Speakercraft Aim LCR Three £450
2 x 5 ¼” Magnesium bass drivers. 1” Alu tweeter. 100watts
H443 mm x W235 mm x D102 mm. Cut out 362mm x 190mm |
|
|
|
|
|
Speakercraft Aim LCR Five £650
2 x 5 ¼” Kevlar bass drivers. 1” Mag tweeter. 100watts
H443 mm x W235 mm x D102 mm. Cut out 362mm x 190mm |
|
|
|
|
|
|
|
|
| |
|
|
Speakercraft AIM7 MT In-wall series
Building on the success of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully pivoting baffle allowing the installer to toe-in the left and right speaker for better stereo imaging. They feature seven-inch woofers, a substantial improvement over the six-inch driver in the original MT6, as well as an offset, independently pivoting tweeter. |
|
|
|
Speakercraft AIM7 MT ONE £150
8” Poly bass driver, 1” silk tweeter, 100watts
Diameter 303mm. Depth 114mm.
Cut out 248mm |
|
|
|
Speakercraft AIM7 MT Two £225
8” Glass composite bass driver, 1” silk tweeter, 100watts
Diameter 303mm. Depth 114mm.
Cut out 248mm |
|
|
|
Speakercraft AIM7 MT Three £250
8” Glass composite bass driver, 1” silk tweeter, 100watts
Diameter 303mm. Depth 114mm.
Cut out 248mm |
|
|
|
Speakercraft AIM7 MT Four £300
8” Aluminium bass driver, 1” Alu pivoting tweeter, 100watts
Diameter 303mm. Depth 114mm. Cut out 248mm |
|
|
|
|
|
|
|
|
|
|
Speakercraft Aim Cinema Dipole series
Creating a diffused sound field for rear channel surround has become critical to mimic the array of speakers along the side and back walls of a traditional movie theatre. The new AIM Cinema DiPole does this in a very elegant format. Each speaker has two 5¼ inch drivers and two 1-inch dome tweeters placed 50 degrees off-axis from each other. Two switchable settings allow the speaker to operate in either a dipole configuration or in opposite polarity as a dipole to create the desired null at the listening area. In the second position there is a circuit to boost bass response, which would normally be lost in the cancellation through the opposite output from the two woofers. |
|
|
|
|
Speakercraft Aim Cinema Dipole 1 £225
2 x 5.25” angled IMG bass drivers. 2 x 1” silk tweeters. 80watts
H443 mm x W235 mm x D86 mm. Cut out 397mm x 190mm |
|
|
|
|
|
|
Speakercraft Aim Cinema Dipole 3 £450
2 x 5.25” angled Aluminium bass drivers. 2 x 1” Alu tweeters. 100watts
H443 mm x W235 mm x D86 mm. Cut out 397mm x 190mm |
|
|
|
|
|
Speakercraft Aim Cinema Dipole 5 £650
2 x 5.25” angled Kevlar bass drivers. 2 x 1” Alu tweeters. 100watts
H443 mm x W235 mm x D86 mm. Cut out 397mm x 190mm |
|
|
|
|
|
|
|
|
|
Speakercraft In-wall Subwoofer Systems
Great bass is still an integral part of any music and theater system.
The drawback has once again been aesthetics. Subs are big and bulky. Most systems are designed with the subwoofer tucked into a corner, inevitably to be used as a plant stand. Not any more.
SpeakerCraft optimized performance by carefully designing each woofer, cabinet, and amplifier as a single system. Just like every good freestanding subwoofer is a carefully blended design of woofer, cabinet and amplifier, so to is each in wall Cinema Sub System. The final result is an in wall subwoofer that performs like its floor standing ancestors.
The three, entirely new, Cinema Subs match flawlessly to a wide variety of speaker models. In larger systems, integrating multiple subs is easy and unobtrusive. Take advantage of this opportunity to get the bass off the floor and allow it to blend into the décor with the rest of the speakers. The all-new Cinema Subs, great bass, no space. |
|
|
|
|
Speakercraft Cinema Sub 8 System £725
8” long throw driver, In-wall enclosure, 150w Mono external amplifier.
Enclosure: H829mm x 365mm x 83mm |
|
|
|
|
|
|
Speakercraft Cinema Sub 10 System £950
10” long throw driver, In-wall enclosure, 200w Mono external amplifier
Enclosure: H1086mm x 365mm x 83mm |
|
|
|
|
|
Speakercraft Cinema Sub 12 System £1395
12” long throw driver, In-wall enclosure, 250w Mono external amplifier.
Enclosure: H1521mm x 365mm x 83mm |
|
|
|
|
|
|
|
|
Other Speaker Craft Products
There are many more speakers from Speaker Craft that are available but not listed. If you are interested in a certain model please call or email and we will do our best to help.
For Quantity Prices please call on 01438 311625 |
|
