|
|
 |
 |
This easy to install digital
dimming system is ideal for home cinema or anywhere
that requires different sets of lights independently
dimmed.
The system consists of a radio
controlled dimming module that is installed between
the incoming supply and the first light in the circuit.
A number of these modules can be installed throughout
the home; each assigned its own ID.
The 2nd part of the system is
the control panel; this is available in different configurations
and finishes. The key pads are battery powered and can
replace the existing light switch or can be surface
mounted on any wall. Scenes can be programmed to independently
dim each dimming module thus providing total lighting
control throughout the home.
Any number of control pads and
dimmer modules can be used and the system can also be
remote controlled.
|
|
|
|
 |
RCP05 Control Pad - £116
The RCP05 is a wireless 5 button
wall mounted control panel providing 4 preset scenes
plus off. The RCP05 communicates with other Rako devices,
such as the RD range of dimmer modules, using coded
FM radio data transmission, ensuring reliable interference
free operation. Rakom coded radio transmission eliminates
the need for any data or power cabling ensuring that
the system can be installed with the minimum of fuss
and disruption. RCP panels are designed to be mounted
anywhere, be it flush mounting to UK back-boxes or
simply surface mounted to any flat surface using the
patress provided. The universal backing plate even
allows the RCP panel to be mounted over European back-boxes.
Face plates come in a variety of standard finishes
including: white, charcoal grey, (brushed stainless
steel, mirror stainless steel and polished brass at
an extra £19)
|
|
|
|
RCPO7 Control Pad £116
The RCP07 is a wireless 7 button
wall mounted control panel providing 4 preset scenes plus
off and master raise lower controls. The RCP07 also has
full scene programming capability. The RCP07 communicates
with other Rako devices, such as the RD range of dimmer
modules, using coded FM radio data transmission, ensuring
reliable interference free operation. Rakom coded radio
transmission eliminates the need for any data or power
cabling ensuring that the system can be installed with
the minimum of fuss and disruption. RCP panels are designed
to be mounted anywhere, be it flush mounting to UK back-boxes
or simply surface mounted to any flat surface using the
patress provided. The universal backing plate even allows
the RCP panel to be mounted over European back-boxes.
Face plates come in a variety of standard finishes including:
white, (brushed stainless steel, mirror stainless steel
and polished brass at an extra £19) |
 |
|
Key
Features
off plus master raise lower
256 house 256 room addresses
15 channel/circuit control (Up to 60 channels accessible
using Rasoft software)
Non volatile memory storage
Smooth cross fading between scenes
Simple system configuration can be performed by non technical
staff
House, room and channel addresses can be set without the
need for a PC
Scenes levels can be programmed from the Scene Sender control
panel
Easy installation without the need for control cabling.
Leave existing wiring intact
Sends scene instructions using coded wireless FM radio communication
with auto repeat and error correction
Transmitting range of 15m in building (100m line of sight)
Long battery life (in excess of 3 years), easily replaced
by the user
Low battery warning by LED indication
Four standard face plate finishes: white, brushed stainless
steel, mirror stainless steel, and polished brass
Many additional non standard finishes available upon request
Flush mounting to UK back boxes
Low profile surface mounting to UK and European back boxes
or direct to flat surfaces
Fully CE compliant
|
|
 |
RDL500C Dimming Module £113
The RDL500C is a single channel
500W dimmer modules using state of the art dimming techniques.
The RDL500C is designed to be ceiling mounted locally
to the luminares and fits through a standard down-light
cut-out. The compact design makes it easy to retro-fit
making scene-set installation as simple as possible.
The module is suitable for dimming resistive and inductive
light sources such as tungsten, low voltage and cold
cathode. Each unit stores, in non-volatile RAM memory,
its user definable addresses; with up to 256 house and
256 room addresses the largest of schemes can be accommodated.
The dimmer also stores it's own channel address (up
to 15 per room) and 4 user programmable scene levels.
Communication with other Rako devices such as the RCP
range of control panels is via coded FM radio, eliminating
the need for control wiring.
RDL250C Dimming Module £93
The RDL250C is a single channel
250W dimmer modules using state of the art dimming techniques.
The RDL250C is designed to be ceiling mounted locally
to the luminares and fits through a standard down-light
cut-out. The compact design makes it easy to retro-fit
making scene-set installation as simple as possible.
The module is suitable for dimming resistive and inductive
light sources such as tungsten, low voltage and cold
cathode. Each unit stores, in non-volatile RAM memory,
its user definable addresses; with up to 256 house and
256 room addresses the largest of schemes can be accommodated.
The dimmer also stores it's own channel address (up
to 15 per room) and 4 user programmable scene levels.
Communication with other Rako devices such as the RCP
range of control panels is via coded FM radio, eliminating
the need for control wiring.
|
|
|
RDL250L Dimming Module £93
The RDL250L is a single channel 250W
dimmer module using state of the art dimming techniques. The
RDL250L is designed to be mounted in-line for use with table
lights and other free standing fittings. The compact design
makes them easy to retro-fit making scene-set installation
as simple as possible. The module is suitable for dimming
resistive and inductive light sources such as tungsten, low
voltage and cold cathode. Each unit stores, in non-volatile
RAM memory, its user definable addresses; with up to 256 house
and 256 room addresses the largest of schemes can be accommodated.
The dimmer also stores it's own channel address (up to 15
per room) and 4 user programmable scene levels. Communication
with other Rako devices such as the RCP range of control panels
is via coded FM radio, eliminating the need for control wiring.
RDL500L Dimming Module £113
The RDL500L is a single channel 500W
dimmer module using state of the art dimming techniques. The
RDL500L is designed to be mounted in-line for use with table
lights and other free standing fittings. The compact design
makes them easy to retro-fit making scene-set installation
as simple as possible. The module is suitable for dimming
resistive and inductive light sources such as tungsten, low
voltage and cold cathode. Each unit stores, in non-volatile
RAM memory, its user definable addresses; with up to 256 house
and 256 room addresses the largest of schemes can be accommodated.
The dimmer also stores it's own channel address (up to 15
per room) and 4 user programmable scene levels. Communication
with other Rako devices such as the RCP range of control panels
is via coded FM radio, eliminating the need for control wiring.
RDF800C Dimming Module £136
The RDF800C is single channel 800W fluorescent
ballast controller. This unit is designed to be ceiling mounted
locally to the luminares and will fit through a standard down-light
cut-out. The RDF800C has a 1~10V output to control high frequency
regulating fluorescent ballasts to IEC929 standard. The compact
design makes the unit easy to retro-fit making scene-set installation
as simple as possible. The unit stores, in non-volatile RAM
memory, it's user definable addresses; with up to 256 house
and 256 room addresses the largest of schemes can be accommodated.
The dimmer also stores its own channel addresses (up to 15
per room) and 4 user programmable scene levels. Communication
with other Rako devices such as the RCP range of control panels
via coded FM radio, eliminating the need for control wiring.
RDS800C Dimming Module £89.95
The RDS800C is a single channel 800W
switching module. The unit is designed to be ceiling mounted
locally to the luminares or non dimmed load and will fit through
a standard down-light cut-out. The RDS800C is suitable for
non-dimmable or switched only loads. The compact design makes
it easy to retro-fit making scene-set installation as simple
as possible. Each unit stores, in non-volatile RAM memory,
it's user definable addresses; with up to 256 house and 256
room addresses the largest of schemes can be accommodated.
The unit also stores its own channel address (up to 15 per
room) and 4 user programmable scene levels. Communication
with other Rako devices such as the RCP range of control panels
via coded FM radio, eliminating the need for control wiring.
RDL1200C Dimming Module £174
The RDL1200C is a single channel 1200W
dimmer module using state of the art dimming techniques. The
RDL1200C is designed to be ceiling or cupboard mounted locally
to the luminares.
**PLEASE NOTE THAT THIS MODULE IS NOT SUITABLE FOR FITMENT
THROUGH A STANDARD DOWNLIGHT CUT-OUT **
The compact design makes it easy to retro-fit making scene-set
installation as simple as possible. The module is suitable
for dimming resistive and inductive light sources such as
tungsten, low voltage and cold cathode. Each unit stores,
in non-volatile RAM memory, its user definable addresses;
with up to 256 house and 256 room addresses the largest of
schemes can be accommodated. The dimmer also stores it's own
channel address (up to 15 per room) and 4 user programmable
scene levels. Communication with other Rako devices such as
the RCP range of control panels is via coded FM radio, eliminating
the need for control wiring.
|
|
Rako Module Timer Control. Astronomical
Clock. 2 Week "Holiday Mode" £410
The MB1 can provide complete timed
control of every light and motorised curtain in your home!
Curtains can be
opened or closed, lights can turned on or off all under
the control of an astronomical clock that precisely
understands the location of your home and how this affects
sunrise and sunset times.
The centralised
controller allows timers to be individually set for
each room, providing total flexibility in day-to-day
operation.
Possibly the most
ingenious feature within the MB1 is its “Holiday
Mode”. The MB1 will monitor and record two weeks
of lighting and curtain operation. When you go away
on holiday, simply press the play button, and all of
your lights and curtains will be automatically operated
as if your home was still occupied.
|
 |
|
|
RF Hand Held Remote Control £100
Rako’s RAH07 hand-held remote
control provides the same level of control and features
as the 7 button control panel.
The RAH07 is capable of controlling
Rako modules in one room, and through ‘room-grouping’
via RASOFT software, several rooms or throughout your
house.
When ‘room-grouping’ is not
required, the RAH07 can be used to precisely configure
the scene settings of each room.
Each of the four available ‘scenes’
can comprise any combination of lights and levels. Whether
you require ambient or activity-focussed lighting, the
RAH07 will allow you the ability to completely adjust
all controlled lights. Fader controls are also provided
for “real time” adjustment of each scene.
|
 |
|
|
|
|
|
|
