|
Control all your AV equipment
in your cupboard without the need of opening cupboard
doors, with the Speaker Craft Infra Red Kit.
In order for you to do this,
you will need an IR Shelf top reciever, power supply,
amplifier terminaor unit, and Infra red emitters.
|
 |
|
 |
|
IRC-3.0
Complete IR Kit. 1 x IRC3.0, 1x AT1.0, 4
x IRE1.0, 1 x PSU
|
£150
|
|
|
|
The IRC-3.0 is an elegant
and compact shelf-top IR receiver, capable of
working in all environments. The AT-1.0, four
IRE-1.0 emitters and PSU provide control of four
independent components.
|
|
|
|
 |
IRC-3
Small Desktop IR reciever
|
£69
|
|
|
|
The IRC-3.0 is a small,
attractively styled IR receiver designed to sit
on a shelf, cabinet or any flat surface.
A blue activity LED informs
the installer of ANS in operation, starting out
brightly then fading as the circuitry suppresses
the ambient noise.
The IRC3.0 provides a control
range of up to 35 feet and off-axis acceptance
of ± 50°, making it suitable for easy-install
IR receiver applications.
|
|
|
|
 |
IRC-2.0
Surface Mount IR reciever
|
£119
|
|
|
|
Designed for surface mounting,
the IRC-2.0 is a very small IR receiver, ideal
for locating under shelves or directly under a
screen.
A blue Activity LED informs
the installer of ANS in operation, starting out
brightly then fading as the circuitry suppresses
the ambient noise.
The receiver is available
in black or white depending on requirements.
|
|
|
|
 |
IRC-2.0
Surface Mount IR reciever
|
£129
|
|
|
|
Designed to flush mount
into a cabinet or rectangular in-wall speaker,
the IRC-1.0 is one of the smallest IR receivers
in the SmartPath range.
Each receiver is
encased in a brass, threaded tube, with only a
circular bezel exposed to the room. Snap-on Colour
Cap (paint-able) bezels are included in White,
Bone, Almond, and Black.
|
|
|
|
 |
AT 1.0
4 Output Amplified Termination Block
|
£70
|
|
|
|
The AT1.0 is the hub of
all SpeakerCraft SmartPath systems.
It includes a wide bandwidth
amplifier for robust operation and the ability
to also drive high power blaster emitters.
Four emitter sockets are
provided, with all out puts being amplified, enabling
long distance emitter runs. Two of the emitter
outputs can be switched to high power mode to
run the IRE5.0 blaster emitters.
|
|
|
|
|
 |
IRE-2.0
Dual Non Blink Emitter
|
£17.50
|
|
|
|
It features a unique EZ-Docker
port that permits the instant removal of the emitter
when re-arranging or servicing components. An
improved adhesive reduces service calls for re-attachment
of ‘fallen emitters’.
The case may also
be taken apart so that the tiny internal emitter
can be placed inside a component, when desired.
High IR output from the top curved surface allows
emitter to be mounted on a nearby surface, below,
above or on a cabinet door, rather than directly
on the sensor of the unit where conditions permit.
|
|
|
|
|
IRE-4.0
Dual Non Blink Emitter
|
£19
|
|
|
|
It features a unique EZ-Docker
plate that permits the instant removal of the
emitter when re-arranging or servicing components.
It flashes red when emitting IR control signals.
The IRE-4.0 has 75% lower
IR output than non-visible emitters and therefore
should be used when controlling multi-zone components
to avoid cross-zone interaction.
An improved adhesive reduces service calls for
re-attachment of ‘fallen emitters’.
|
|
|
