Will the bracket fit my screen?
In most cases the answer is YES.

Plasma and LCD screens are primarily designed to fit on a wall, so the back of the screens are generally flat. This is to allow the screen to sit as close to the wall as possible. However, a few screen manufacturers design teams may have had a bad day and decided to make a screen with a curved back or some extra unnecessary sticky out bits.

For example the Panasonic VEARA plasma range is designed with speakers at its base that stick out an extra 45mm from the back of the screen. Our bracket is 22mm deep so to solve the problem we make a 45mm deep hook section to bring the plasma off the wall just enough for the back of the speakers to almost touch the wall. For more screen fitting advice please call us on
01438 311 625

Do the bolts to fit my plasma come with it?
Yes, an assorted selection of bolts do come with the bracket that fits 99% of all plasmas.

My plasma has a curved back, and the connections are located at the back (not at the bottom), will your bracket fit?
Yes, but when ordering, ask for the extra depth bars on the hook section.

Do you have any tips on installing the plasma?
Depending on the model of screen it is sometimes easier to connect the cables before the screen is put on the wall.

Mark with a bit of tape on the top centre of the plasma and on the wall above the centre of the bracket.
When the two pieces of tape line up you know the plasma is on the centre of the bracket.

When mounting onto brick or concrete use 70mm raw plugs with 70mm size 12 screws. For 50" screens and above you may need to use expanding bolts.

What is the difference between your bracket and other brackets on the market?
Main difference...is that ours allows easy plasma installation, as well as being the slimmest bracket on the market.
beware of copy brackets...Buy the better bracket, as used by installers all over the uk
Better Bracket has a European Community Design Registered